Cumulus Networks Layer-3 Leaf-Spine Fabric with EVPN as a Control Plane for VXLAN

September 26, 2017
Testing Cumulus Networks Linux
by Pablo Narváez

Welcome back! In this article I will be testing VXLAN again, but this time on Cumulus Linux. I will replace the manual VTEP flood-lists/mappings (Head End Replication) with EVPN to provide a different control plane for VXLAN.

For lab purposes, I will use a self-contained virtual environment to run Cumulus VX as a VM on top of Ubuntu 16.0.4 LTS and KVM.…

BGP Interoperability between Free Range Routing (FRR) and Arista EOS

August 17, 2017
Free Range Routing
by Pablo Narváez

Today I will test BGP between the FRR routing stack and Arista EOS. The sample configuration that I will show later in this post is just a basic integration between the two devices, nothing at all complex. Basically, I just wanted to expand my virtual environment by adding a DC/routing perimeter while testing FRR.…

Arista Layer-3 Leaf-Spine Fabric with VXLAN HER: Lab Part 4

August 2, 2017
Configuring and Testing VXLAN
by Pablo Narváez

This is the last article in the series, we will finish this lab with the VXLAN configuration and testing connectivity between servers.


The VXLAN protocol is an RFC (7348). The standard defines a MAC in IP encapsulation protocol allowing the construction of Layer-2 domains across a Layer-3 IP infrastructure.…

Arista Layer-3 Leaf-Spine Fabric with VXLAN HER: Lab Part 3

August 2, 2017
Configuring the Layer-3 Ethernet fabric

by Pablo Narváez

Hello there, welcome to the third article in the series. In this post, we will configure the Layer-3 Fabric (Underlay) so we are ready for VXLAN (Overlay).

During the configuration process, you will notice that the Layer-3 Leaf-Spine design (L3LS) design has a number of elements that need to be considered to implement it.…